Standards

The standards you certify against.

EMV®, NFC Forum, ISO/IEC 14443 / 15693 / 10373, ISO 7816 and iTAP — what each one is, and how cilab tests it on one integrated bench.

Payment certification

EMV® Level 1 contact & contactless testing

EMV® Level 1 is the physical and protocol layer of payment — the analog and low-level digital behavior every payment card, terminal and phone must pass before type approval, on both the contact (ISO 7816) and contactless (RF) interfaces.

Interoperability certification

NFC Forum certification

NFC Forum certification proves an NFC device interoperates with the rest of the ecosystem. CR15 is the current certification release, extending the tested operating range and consolidating the analog, digital and wireless-charging requirements.

Contactless standard

ISO/IEC 14443 proximity card testing

ISO/IEC 14443 is the foundation of contactless — the 13.56 MHz proximity standard behind payment cards, transit, eID and access. Almost every NFC and EMV® contactless product builds on it.

Contactless standard

ISO/IEC 15693 vicinity card testing

ISO/IEC 15693 is the vicinity contactless standard — 13.56 MHz like ISO 14443, but designed for a longer read range, used in library, asset-tracking and some access applications.

Test methods & calibration

ISO/IEC 10373-6 contactless test methods

ISO/IEC 10373-6 is the 'how to test' standard for contactless proximity cards. It defines the reference equipment and measurement methods that EMV® and NFC Forum analog test plans build on.

Contact standard

ISO/IEC 7816 contact smart card testing

ISO/IEC 7816 is the contact smart-card standard — the gold-contact chip behind SIM cards, payment chips and ID cards. Unlike contactless, the card is powered and clocked through physical contacts.

Wireless charging

NFC Wireless Charging (WLC) testing

NFC Wireless Charging (WLC) lets a device draw power over the same 13.56 MHz NFC link it already uses for data — ideal for small devices like wearables and styluses, with no extra coil.

Emerging NFC standard

iTAP — the intelligent NFC tap standard

iTAP is a new contactless standard that upgrades the NFC 'tap' — making selection of the right card or credential at a smart terminal faster and more reliable. Driven by an industry consortium of chip, handset and payment companies, it runs on the same 13.56 MHz NFC layer as the rest of the contactless ecosystem, so it can be developed and pre-tested on the ci230 today.

One bench for every standard.

The ci230 runs EMV®, NFC Forum, NFC-WLC, ISO 10373 and iTAP from a single integrated instrument; the ci220 covers ISO 7816 contact.

Request a demo